Create a Website Account - Manage notification subscriptions, save form progress and more.
Show All Answers
In January 2022, the City of Friendswood began a meter conversion project for all of its residential and commercial water utility customers. Once the project begins, it is expected to take 12 to 18 months to replace approximately 14,000 meters throughout the City’s water utility system, install data transmission equipment, and implement the customer information portal. The City is working with the company Ameresco, and their subcontractor RTS/EnvoCore, to replace outdated manual meters with upgraded meters as part of an Advanced Metering Infrastructure (AMI) project. This AMI water meter project will upgrade and modernize the City’s water billing infrastructure.
Customers will not be charged for the new meter. The City of Friendswood will incur all costs for the new meter, the installation of the meter and repairs to the meter area from damage caused by the installation.
AMI stands for Advanced Metering Infrastructure. These new AMI meters consist of a water meter with a low-powered communication device/radio that is continuously recording usage and the radio sends a meter reading to the city through a secure network every 6 to 12 hours.
With this AMI water meter project, customers will have access to more frequent detailed information about water consumption, enabling them to have better control over their water usage and utility bills. Upon completion of the meters installation and testing, customers will be sent information on how to access and use the new technologies that come with the new system.
In most cases, less than 30 minutes.
In most cases, the work will be performed Monday - Friday from 7 a.m. to 7 p.m. There may be some work performed on Saturday.
Ameresco and RTS/EnvoCore employees will be properly identified with their company logo on their vehicles and uniforms.
Yes. Signage will be placed in the work area as work crews begin to install new meters in that location. Before starting the replacement process at a residence, a member of the installation team will give a courtesy knock on the front door. If a customer answers the door, the team member will explain the process and ask that the customer not use any water for approximately 30 minutes during the installation. If there is no response, and before beginning the installation the team will attempt to determine that water is not currently being used. If it is determined that water is currently in use, the team will proceed with work on another customer meter and return to re-attempt the installation.
Yes. Work crews will place a door hanger at the residence to indicate the installation process has begun on replacing the water meters in the neighborhood but due to scheduling or the availability of supplies the installation process will require a return visit to your property to complete the new meter. If a temporary pause in the installation process occurs, it will not disrupt water service to the customer.
Yes. Work crews will place a door hanger at a residence if they are unable to access the meter location or need the resident’s assistance in other ways before the meter can be changed out. This may include the meter being behind a locked gate, unsecured dog or other obstructions that prevent crews from performing their work.
Yes. Work crews will place a door hanger at the residence once the new meter is installed and it will provide instructions to follow on flushing your lines if needed.
In most cases, there will be an interruption of service for approximately 15 to 30 minutes during the meter replacement.
No, they do not need to enter your home. If the water meter is behind a fence, workers will need access to that part of the property. Ameresco, RTS/EnvoCore, or City of Friendswood employees will not have to enter homes at any time to perform meter replacement work.
No, your new meter does not require any maintenance by the customer. The City of Friendswood will address all maintenance. Once installed, customers will be responsible for meter replacement costs if damages occur.